Prostat PWS-610M-C

PROSTAT PWS-610M-C CASE OF 25 EACH


PROSTAT PWS-610M-C CASE OF 25 EACH
935,00 $


Primo number :PRPWS-610M-C
Brand :Prostat
Brand number : PWS-610M-C




Disponibility
Call us for availability

Quantity :



1-888-774-6665 Need help? Contact us 1-888-774-6665


PROSTAT PWS-610M-C CASE OF 25 EACH - Comfortable & Operator Friendly. - Includes a 10 foot cord with 1 meg Ohm Resistor. - Adjustable buckle and 100mm snap cover. - Weighs under 1 ounce. - Uses 1/3 the working or storage space. - Metal Alligator Clip included. - One size fits all. In conjunction with the best product designers in the ESD industry, Prostat has created new refinements in wrist strap technology. Prostat wrist straps are specially designed for durability, lightweight, portability and comfort. These unique personnel and instrument grounding products are intended for use in demanding, high performance applications where reliability is the priority. Compared to traditional wrist straps with fabric cuffs and 10 ft cords, the PWS-610 weighs 60 percent less (under 1 ounce) and uses 1/3 the working or storage space of a standard assembly. The PWS-600 series is so compact that it can be easily carried or stored in a pocket, mini audit kit, or small cabinet spaces. Its knit, two way stretch fabric cuff is extremely comfortable and fully adjustable. Specifications 1- Cuff Assembly Buckle: 1.0W x 1.0L x 0.25H inches. Gray, Adjustable with positive lock, stainless steel back plate. Standard male 5/32" snap (0.154 inch, 4mm); provides 360o performance. Patented, Easily adjusted buckle incorporating a positive fabric lock to eliminate slip and enhance skin contact. Non-sensitizing stainless steel back plate. Fabric: 0.85 inches wide. Grey, knit incorporating silver plated filament and elastic nylon. Insulative outer cuff surface, conductive inner cuff surface. Size/Length: Nominal 6.5" After stretching to 2x length and relaxing. Adjustable: Easily adjustable to fit all personnel. Control: Date coded and Prostat manufacturer's logo embossed on all cuff assemblies ''M" series cuffs: Incorporate a 10mm male snap and insulated snap cover installed in the fabric approximately 1.5 inches from the cuff buckle. The 10mm snap is used to mount and ground the Prostat PFM-711A Field Meter and CPM-720A Charge Plate Monitor. 2- Cord Assembly Cord: Heavy Duty, Lightweight construction of Single bundle, laced tensile conductors reinforced with synthetic fibers. Cord Diameter: 0.06" Coil Diameter: 0.26" Alligator clip supplied. Resistor: One megohm (±10%) resistor molded into snap connection Ground Connection: Standard banana plug Warranty: Warranted for One Year against mechanical and electrical defects. Cord Extension: Full extension greater than 13 feet; Working Length greater than 10 feet. Tested: Provides over 100,000 bending cycles per EOS/ESD-S1.0-1987 procedures. WARNING: A one-megohm resistor has been molded into the plastic cap on the ground cord fastener. DO NOT REMOVE. If it becomes damaged, replace ground cord immediately. Do not use in areas where the individual may come in contact with electrical circuits exceeding 250 volts. CAUTION: The Prostat wrist strap is for static control. It will not reduce or increase your risk of receiving electrical shock when using or working on electrical equipment. Follow the same procedures you would use without wrist straps, including: * Make certain that equipment having a grounding type plug is properly grounded. * Make certain that you are not in contact with grounded objects other than through the strap.


Accepted payment methods
Visa MasterCard

General terms and conditions
including shipping and delivery
Shipping and delivery

1-888-774-6665
Speak free with one of our advisors


facebook google + youtube linkedin