CATEGORIES
Fluke 700HTP-2
Fluke 700htp-2 hydraulic test pump 10 000 psi/690 bar
|
FLUKE 700HTP-2 HYDRAULIC TEST PUMP 10 000 PSI/690 BAR
The Fluke 700HTP-2 is a hand operated hydraulic pressure pump designed to generate calibration pressures up to 10,000 psi/690 bar. Designed for use with Fluke-700 series high pressure modules such as the Fluke-700P09, 700P29, 700P30 and 700P31. Ideal for calibration when connected to a Fluke high pressure module via the reference port. The 700HTP-2 uses distilled water or mineral-based hydraulic oil as a source for calibration of high pressure input devices such as pressure transmitters or pressure gauges. Can also be used with Fluke 717 pressure calibrators.
FEATURES
. Variable size stroke adjustment, allows the user to vary the volume and pressure per stroke
. Integral pressure adjustment vernier knob for fine pressure adjustment.
. Directly connection to pressure modules consolidates two separate pieces into one when performing pressure calibration and testing
. Two ¼ inch NPT pressure ports, one for reference (pressure module or gauge), one for UUT
. Compatible with optional Fluke-700PRV pressure relief valve designed to protect pressure modules from overpressure damage
. Improved priming
. Improved stroke limiting mechanism
Note: The user must provide a hose with appropriate end fittings to apply pressure from the UUT port to the calibration unit under test such as the Fluke-700HTH-1 hose kit.
Includes:
¼ inch NPT to ¼ inch NPT adapter to connect the reference gauge port on the pump body to the 1/4 NPT female fitting on Fluke 700P29, P30, and P31 pressure modules.
(2) ¼ inch NPT male to ¼ inch BSP Female adapters.
¼ inch NPT Tee (installed).
Instruction sheet .