AMPROBE ACD-10 PLUS DIGITAL CLAMP ON METER CAP FREQ
The Amprobe ACD-10 PLUS clamp multimeter has thinner jaws than standard digital clamp multimeters (only 0.4"/10mm thick) allowing access to tight measurement areas and still handles conductors up to 1.0 (25mm).
It combines the convenience and flexibility of an AC/DC current clamp meter with the most frequently used digital multimeter functions, including ac/dc current and voltage, capacitance, and frequency.
. Measures AC and DC voltage to 600V and AC current to 600A to handle residential/commercial and small industrial applications
. Thin jaws, only 10mm (0.4") thick make it easier to maneuver between tightly packed conductors
. Measures frequency, resistance, and capacitance
. Features continuity beeper to quickly find opens and shorts
. Accommodates conductors up to 1.0" (25mm) in diameter
. Auto ranging saves time by instantly selecting correct range
. Auto power off to conserve battery life
. Rubber over-molded case absorbs shock
. Includes test leads, battery (installed), soft carrying pouch, and users manual
FEATURES:
True-rms
AC Voltage 4.000 V, 40.00 V, 400.0 V, 600 V
DC Voltage 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600 V
AC Current 40.00 A, 400.0 A, 600 A
Resistance 400.0 µO, 4.000 O, 40.00 O, 400.0 O, 4.000 MO, 40.00 MO
Capacitance 500.0 nF, 5.000 F, 50.00 CF, 500.0 µF, 3000 µF
Frequency 40 Hz- 400 Hz with Jaw, 10 Hz - 100 kHz with test leads
Temperature - -
Dual displays - -
Micro Amps - -
Accommodates conductors up to 1.0''(25 mm) in diameter
SPECIFICATIONS:
Display: 3-3/4 digits 4000 counts LCD display
Update rate: 3 per second nominal
Polarity: Automatic
Operating temperature: °C to 40 °C; < 80% RH for temperature up to 31 °C decreasing linearly to 50% RH at 40 °C
Altitude: Operating below 2000m; Indoor use
Storage temperature: -20 °C to 60 °C, < 80% RH (with battery removed)
Temperature coefficient: nominal 0.15 x (specified accuracy)/°C @(0 °C ~ 18 °C or 28 °C ~ 40 °C)
Low battery: Below approx. 2.4V
Power supply: 3V coin battery IEC-CR2032
Power consumption: 2.8 mA typical except that 3.3 mA typical for ACA function
APO timing: Idle for 30 minutes
APO consumption: 5 µA typical
Jaw opening & conductor diameter: max 26 mm
Special features: 30ms Max Hold; Data Hold; Relative Zero mode