Primo Trousse / Kit #3

PRIMO KIT ALL-TEST PRO 31 + FLUKE TI100


PRIMO KIT ALL-TEST PRO 31 + FLUKE TI100
Call us for a price


Primo number :PRKIT3
Brand :Primo
Brand number :Trousse / Kit #3




Disponibility
Call us for availability

Quantity :



1-888-774-6665 Need help? Contact us 1-888-774-6665


Trousse All-Test Pro 31 + Fluke Ti100 PRKIT3 SAVE $500 WHEN PURCHASING THIS KIT ------------------------------------------------------------------- All-Test Pro 31 with 115V Charger Adapter *** SOFTWARE SOLD SEPARATELY *** Motor Circuit Analyzer THE PERFECT TOOL FOR TROUBLE SHOOTING, START-UP & QUALITY CONTROL OF AC/DC ELECTRIC MOTORS, GENERATORS OR TRANSFORMERS • Trouble Shooting: Know in a few minutes what the problem is: electrical or mechanical, coil or rotor, internal fault or ground fault. • Start-up: Make sure all electrical motors are working in top condition. • Quality Assurance: Test all new/repaired and stored spare motors. • Light PdM: Also suited for limited, manual, Predictive Maintenance. REVOLUTIONARY TESTER GOES FAR BEYOND WHAT YOU CAN SEE W/ONLY A MEGOHMMETER! • Safe: De-energized testing • Easy: As easy to use as any Meg-ohm-meter • Light: One lb., handheld • Batteries last for up to 10 hours of testing • Best Value: Doesn’t cost more than a good meg-ohm-meter. Quick return on investment WHAT YOU WILL FIND WITH THE AT PRO® 31: - Turn to turn & coil to coil faults - Contaminated windings; grease, dirt & liquids - Phase Unbalance; Z-unbalance = higher electrical bill & shorter motor life - Open windings; no conductivity - Rotor faults; broken bars, air-gaps, casting voids, etc* - Insulation to ground faults; Choose 500 or 1000 volt test, read to 500 Meg-ohm - EMI numbers in mV shows whether readings are reliable, or not *A fast, easy and effective way to find broken rotor bars, eccentric rotors and casting voids. AT31 testing range is dependent upon motor, transformer, or generator design, but the AT31 has successfully tested AC motors of hundreds of horsepower in size. Instrument shows immediate results on screen, uploadable to software for further Analysis, Trending and Reporting. The ALL-TEST PRO 31 is the prefect tool for Trouble Shooting and Quality Control of de-energized motors, rotors, coils and windings. A must have tool for a serious electrician working with motors. No other testing equipment for electric motors, generators and transformers gives you a more accurate, easy to use and economical way to keep your motors and windings healthy. ----------------------------------------------------------------- Fluke Ti100 Thermal Imager IFOV (spatial resolution): 3.39 mRad Detector resolution: 160x120 (19,200 pixels) Field of view: 22.5°H x 31°V Minimum focus distance: 122 cm (48 in) Focus system: Focus free (fixed focus) Wireless connectivity: Fluke Connect™ app compatible with included wireless SD Card1 Display: 3.5 inch diagonal (portrait format) Design: Rugged, lightweight, ergonomic design for one-handed use Thermal sensitivity (NETD) = 0.10 °C at 30 °C target temp (100 mK) Temperature measurement range: -20 °C to +250 °C (-4 °F to +482 °F) Built-in digital camera (visible light): None - IR only Frame rate: 9 Hz Keywords: Trousse2015FL, Motor Meter


Accepted payment methods
Visa MasterCard

General terms and conditions
including shipping and delivery
Shipping and delivery

1-888-774-6665
Speak free with one of our advisors


facebook google + youtube linkedin