AEMC 6470-B Kit-300ft

AEMC 6470-B Kit - 300 ft. MULTI-FUNCTION GROUND TESTER


AEMC 6470-B Kit - 300 ft. MULTI-FUNCTION GROUND TESTER
3 788,40 $


Primo numéro :AE213503
Manufacturier :AEMC
Manufacturier numéro :6470-B Kit-300ft




Disponibilité
Appelez nous pour disponibilité

Quantité :



1-888-774-6665 Besoin d'aide? Contactez-nous au 1-888-774-6665


AEMC MODEL 6470-B Kit - 300 ft. MULTI-FUNCTION GROUND TESTER • 4-Pole (4-Point) Fall-of-Potential measurement for very low resistance measurements with manual or automatic frequency selection and automatic lead compensation • 3-Point Fall-of-Potential measurement • 3-Point earth coupling measurement • Manual or automatic frequency scan from 40 to 513Hz for test accuracy in electrically noisy environments • Earth coupling testing • Measures earth coupling • Selectable test voltage of 16 or 32V with up to 250mA of test current • 4-Point soil resistivity measurement with automatic calculation of Rho (r) and user selection of the Wenner or Schlumberger test method • 2- and 4-Wire DC resistance measurement (Bond testing) with automatic polarity reversal • Auto-off power management • Automatic recognition of all electrode connections and their resistance value • Stores up to 512 complete test results in internal memory • Optically isolated USB communication • Remote set up and operation of all measurements using DataView® software supplied • Automatic report generation • Rechargeable NiMH batteries from wall charger or vehicle power The Model 6470-B is also available in complete kit form, which includes instrument, two 300 ft color-coded leads on spools (red and blue), two 100 ft color-coded leads (green and black), four 14.5" T-shaped auxiliary ground electrodes, one set of five spaded lugs, 100 ft tape measurer and carrying bag. APPLICATIONS - 3-Point measurements of resistance to ground of ground rods and grids. 3-Point measurements are used when electrode or grid can be easily disconnected. - 4-Point tests or soil resistivity measurements. Locating areas of lowest soil resistivity is essential for achieving an economical grounding installation. - Touch and step potential testing measurements. These tests are recommended when the ground cannot be disconnected, where ground faults are highly likely to occur, or when the “footprint” of grounded equipment (the outline of the part of equipment in contact with earth) is comparable to the size of the ground to be tested. - 2- or 4-Wire tests for continuity tests on bonding or on grounding systems. Test is a DC resistive test using 250mA or more and is used to check bonding of all connection points on the ground system. - Earth coupling measurement and display. Used to estimate the influence of two earth resistance systems that are not connected to each other.


Modes de paiement acceptés
Visa MasterCard

Termes et conditions générales
incluant expédition et livraison
Expédition et livraison

1-888-774-6665
Parlez avec un de nos conseillers sans frais


facebook google + youtube linkedin