|
New
Coating
Tickness
Gauges
Landtek |
New
Earth ground
Tester
Fluke |
New
Combustion
Analysers
E Instruments |
|
|
|
|
|
|
| Portable |
 |
 Sku: Fluke 225C & 215C
*** PROMO SAVE UP TO $1100.00 ***
Based on the 199C and 196C Color ScopeMeters, the 225C and 215C offer the full functionality of those instruments yet with the addition of powerful test capabilities for a wide variety of Industrial Bus systems. When in Bus health Test mode, these ScopeMeters automatically make an analysis of the electrical signals passing through the bus, and compare the parameters to standard values as described in the industry standards for that bus type. Alternatively, the user may select an ‘Eyepattern’ display to visually check the overall signal quality.
Parameters are automatically qualified as ‘good’, ‘weak’ or ‘bad’ based on a comparison to the appropriate industrial standards or to user set reference values. Each of the measured parameters is presented with momentary value and with statistical minimum and maximum values measured over time. The reference values used are also displayed, to give the user an easier grip on the systems behaviour. Tested parameters include signal amplitudes, bias voltage, rise- and fall-times, jitter, distortion and noise levels (in-band noise as well as out-of-band noise) depending on the requirements of the associated industry standard.
|
|
|
|
Sku: Fluke 123, 124 & 125
*** PROMO SAVE UP TO $1100.00 ***
The compact ScopeMeter 120 Series is the rugged solution for industrial troubleshooting and installation applications. It’s a truly integrated test tool, with oscilloscope, multimeter and “paperless” recorder in one affordable, easy-to-use instrument.
• Dual-input 40 MHz or 20 MHz digital oscilloscope
• Two 5,000 counts true-RMS digital multimeters
• Automatic measurements
• A dual-input TrendPlot™ recorder
• Connect-and-View™ trigger simplicity for hands-off operation
• Shielded test leads for oscilloscope, resistance and continuity measurements
• 10:1 Voltage Probe included with Fluke 124 and 125 for high frequency measurements
• Up to 7 hours battery operation
• 600 V CAT III safety certified
• Optically-isolated interface for PC connection
• Rugged, compact case
• Fluke 125 gives bus health and power measurements
*** More info ***
|
Sku: Fluke 190, 196 & 199
*** PROMO SAVE UP TO $1100.00 ***
ScopeMeter 190C and 190B Series have specifications you typically only find on high-end bench oscilloscopes. They offer up to 200 MHz bandwidth for capturing high frequency signals, as found in today’s state-of-the-art electronics, 2.5 GS/s real-time sampling and advanced memory and triggering functions. They’re rugged, compact and battery powered.
*** More info ***
|
|
|
|
;)
;)
;)
