Nouveaux produits Formulaire de demande pour catalogue  |  Service à la Clientèle Panier   •   English     Nouveau Mesureur d'Épaisseur Revêtement Landtek New Earth ground Tester Fluke Nouvel Analyseurs de Combustion E Instruments  Sondes Logiques  Dessus • Sondes Logiques  Logic Probe ...affichez les détails  Article stock: GLP-1 • Tests TTL, DTL, RTL, HTL, CMOS and MOS • Displays pulse presence and logic states • Catches pulses to 10nS, or pulse trains to 50MHz • Input overvoltage protection  Pulser ...affichez les détails  Article stock: GPG-2 • For TTL, DTL, RTL, HTL, CMOS and MOS • Produces 10mS pulse signal • Overload protected • Output current up to 100mA (pulse)  Oscilloscope Probe Kit ...affichez les détails  Article stock: Model HP9150 This is a passive, low impedance probe The probe has been designed and calibrated for use on instruments having an impedance of 1MW paralleledby 20pF However, it may be compensated for use on instruments having an input capacitance of 15 to 35pF The probe incorporates a three position (x1, Ref, x10) slide switch in the head, compensating network and a cable length of 1.4 meters To adjust probe in the x10 position, simply look at the cal output of your scope and adjust trimmer capacitor at base of connector to best flat waveform

Primo Instrument carries a wide range of calibration instruments from fluke, megger, druck. We also provide calibration services, instrument repair and instrument certification.